Energy Optimization Composite Presses

Relief of the installed components and highest precision

Presses have a very poor efficiency in the pressure holding phase! This is where a digital hydraulic pressure-maintaining unit comes in, which can maintain pressure with maximum precision while still saving a significant amount of energy and relieving the load on the installed components, resulting in fewer failures.

Project partner: Miba

Requirements

 

  • Reduction in energy consumption while maintaining the same throughput rate
  • Wear reduction in the hydraulic system
  • Autonomous automation
  • Can be retrofitted on existing sintering presses by Miba employees

Solution

 

  • Digital hydraulic pressure regulator
  • Design and optimization with digital product development for existing sintering presses
  • Use of standard hydraulic components
  • Integration on site
  • Energy savings of up to € 8,000 per year and press

Your Contact Partner

Dipl.-Ing., Dr. Bernd Winkler

Business Area Manager Drives



+43 732 2468 6050

1 + 4 =

Share this information

Funding Bodies