Invitation to Technologieradar | Digital hydraulics and displacement control 2013

Linz Center of Mechatronics GmbH Altenberger Straße 66, Linz, Oberösterreich, Österreich

Digital hydraulics and displacement control - latest market-ready innovations in hydraulic drive technology; Dates: The deadline on January 16th is canceled, the substitute date is Wednesday, February 13, 2013! Wednesday, December 12, 2012 or Wednesday, January 16, 2013, from 2 pm to 5 pm; Location: JKU Science Park, Altenbergerstrasse 66, 4040 Linz, Building 1, Room […]

TECONOMY “Your path to success” 2017

Science Park 1 Linz

On 5 April the TECNOMY will take place in the Kepler building of Johannes Kepler University, the trade fair for technicians. Visit us at our UAR community stand and learn about LCM. Maybe you are a colleague or a colleague of us.

LCM at the Hannover Messe Industry (HMI) 2017

Hannover Messegelände, Hannover, Deutschland

At the Hannover Fair Industry, LCM will present results on the topic of digital twin. The Linz Center of Mechatronics GmbH (LCM) is your partner in the research and development of new as well as in the optimization of existing technical products, systems and processes. We support our customers, national and international production companies, from […]

LCM at SMART Linz: Trade Fair for Industrial Automation

SMART Automation Austria is Austria's only trade fair for industrial automation. The focus is on factory automation and process automation. The range of products and services ranges from the component level to complete systems and integrated automation solutions and covers all areas of industrial automation technology. SMART Automation Austria is the platform for the Austrian […]

Manufacturing Performance Days 2017

Tampere, Finnland , Finnland

The Manufacturing Performance Days will be from 29th to 31st of May in Tampere, Finland. Dr. Johann Hoffelner, LCM will give a lecture on 31.5. More information see: MPD2017_Programme_180417-4516

LCM at Sensor and Test 2017 in Nuremberg

Messezentrum Nürnberg

SENSOR + TEST is the world's leading forum for sensor technology, measurement and testing technology. In 2016, 586 exhibitors from 32 nations presented impressively the entire spectrum of measuring system competency, from sensor to evaluation. LCM will be present at the trade fair. Visit us!

QoMEX 2017

Von 31. Mai 2017 bis zum 2. Juni 2017 findet in Erfurt die 9e internationale Konferenz "on on Quality of Multimedia Experience" statt. Unser Kollege Dr. Dipl.-Ing. Florian Hammer wird dort einen Vortrag über "Quality of Experience of Cyber-Physical-Systems" halten. Mehr Informationen finden sich hier: http://www.qomex2017.org/

4smarts2017 | Symposium for samrt structures and systems

The focus of 4SMARTS is on the interdisciplinary theme of the active, intelligent and adaptive - briefly: smart - structures and systems. Accordingly, the symposium covers all relevant technology fields with numerous contributions from research and application: from the material to the design of components and the integration of functions up to the reliability of […]

Forum Industrie: Production

Hotel Vienna South – Hilton Garden Inn, Wien Hertha-Firnberg-Straße 5, Wien

Lecture on the second conference day by LCM - Linz Center of Mechatronics GmbH expected to be Dr. Markus Schörgenhumer

International Engineering Fair | Brno

The International Engineering Fair (MSV) is the leading industrial trade fair in Central Europe with annual participation reaching more than 1500 exhibitors and 75000 visitors from  59 countries worldwide. More than a third of the exhibitors are from abroad. All nine of the key specialist sectors of the engineering industry are very well represented. The first time […]

LCM at automotive.2017

Voestalpine Stahlwelt Linz

The automotive.2017 is Austria's meeting place for visions, innovations and future technologies in the area of mobility and shows the thrust of the car industry, brought to the attention of the top speakers and the speakers.

Hydrive: Project and Steering Committee Meeting

Linz Center of Mechatronics GmbH Altenberger Straße 66, Linz, Oberösterreich, Österreich

Am 7.12 findet ein Projekt and Steering Comittee Meeting bei LCM zum Projekt Hydrive statt.

Smart Industry Forum

Kopenhagen

Presentation among others by our scientific managing director DI Dr. Johann Hoffelner in Copenhagen.

SyMSpace Days

When: 24th April 2019 Place: LCM, Science Park 1, Altenberger Strasse 69, 4040 Linz Digitalisation and artificial intelligence as well as the associated changes are on everyone's lips, naturally also in the field of electrical drive technology. During the SyMSpace Days we will present the strategic further development of SyMSpace and news from simulation in […]

Digital Innovation Hubs Day

This event will bring together European digitization initiatives and Digital Innovation Hubs (DIH) with the ones situated in Baden-Wuerttemberg (Southwest Germany) and its neighbouring countries Austria, Switzerland and France. Kollege, DI Daniel Reischl, wurde vom Veranstalter eingeladen, die Erfahrungen eines österreichischen DIHs einzubringen und das Projekt DIH² vorzustellen.

REM 2019

Colleague DI Dr. Markus Schörgenhumer will give a lecture: "From Modeling and Simulation to Virtualization".

ESReDA: European Safety, Reliability & Data Association

Science Park 1 Linz

ESReDA provides.. A forum for the exchange of information, data and current research in Safety and Reliability and a focus for specialist expertise. More information: www.esreda.org.

Knowledge Engine Co-Creation Workshop

POSTCITY, AIxMusic Workshop Space Bahnhofpl. 12, Linz

As part of the Ars Electronica Festival, LCM will be hosting a co-creation workshop about Knowledge Engine. THU 5.9. 14:00 – 14:30 Welcome POSTCITY, AIxMusic Workshop Space 14:30 – 15:30 Introduction SymSpace POSTCITY, AIxMusic Workshop Space   FRI 6.9. 11:00 – 12:00 Group Presentations and Exchanges POSTCITY, Hackathon Space

FFG FORUM 2019 >> BEST OF FUTURE

Wiener MuseumsQuartier Halle E

At the annual FFG FORUM, guests from industry, research, administration and politics discuss those forward-looking topics that are important for the research and innovation power of our country. The FFG FORUM 2019 will focus on Austrian research successes as well as new trends and challenges for applied research and the exploitation of research findings. Using […]

Digitalization-Economy Talk

PANEUM - Haus des Brotes Kornspitzstraße 1, Asten

MITTELSTANDS-ALLIANZ: How the digitization of medium-sized businesses is successful Enough theorized - Now it's time to move - At eye level! This event is different from many other digitisation events! While most of the time it is only theorized, this is about the practical implementation. With company relevant top information on the overall situation of […]

13. International Forum Mechatronics

Cham Cham, Bayern, Deutschland

Mechatronics is and remains the key technology for the production of the future. The use of cyberphysical systems offers many advantages, such as intelligent process control or the early detection of production stoppages. The profitable use of these complex systems as services of the future is crucial!

GAINER Festival 2019

Tabakfabrik, Linz Peter-Behrens-Platz 8-9, Linz, Österreich

Industrierobotik

Pöttinger Landtechnik GmbH Industriegelände 1, Grieskirchen, Oberösterreich, Österreich

As a Digital Innovation Hub in the European network DIH², LCM is the local contact to accelerate the production with robotics. LCM supports manufacturing companies and technology providers in testing the use of the latest technologies in production. In a workshop at the Industrial Robotics Conference designed by LCM, you will learn how you can […]

Forum Service: Digitisation does not make it easier

amsec Impuls Softwarepark 37, Hagenberg

LCM reports at the Forum Service about the digitization of new and old plants by smart bearings together with project partner NKE. Anmeldeschluss 28.10.2019  

LIT Lectures – Science in a nutshell

If you want to know what is being researched at JKU, then visit the LIT Lectures. Bernhard Bergmair will talk about the concept of Networks of Knowledge Engines.

Cross-Mentoring closing ceremony 2019

LIT Open Innovation Center Altenberger Straße 69, Linz

Experience finale of the ongoing cross-mentoring and establish contacts with former participants at the annual network meeting. Our CEO Gerald Schatz, will be part of the panel at the Cross-Mentoring Programme 2019. The event is free of charge. Limited number of participants - registration absolutely necessary! Registration deadline: 10.11.2019

SPS Nuremberg

Messezentrum Nürnberg

nber

SPS Italy

Fiere di Parma Viale Delle Esposizioni, 393a, Parma, Italien

AMB

Current communication technology trends (5G, TSN, SPE, APL)

MS Teams

The speakers from Phoenix Contact, DI Jörg Brasas (Strategic Product Marketing Communication Interface) and DI Uwe Nolte (Product Marketing Network Technology) focus on the following topics: As part of digitization and Industry 4.0 or IoT, more and more devices are being integrated into industrial networks. New technologies such as 5G, TSN (Time Sensitive Network), SPE […]

Logo Upper Austria